Replaceable and upgradable LPCAMM2 laptop memory is here and it's a big deal

DragonSlayer101

Posts: 408   +2
Staff
The big picture: Laptop memory was once easily upgradable, but the advent of soldered-down DIMMs in recent years has made RAM upgrades almost impossible in modern notebooks. That, however, is set to change with the arrival of LPCAMM2, which promises to make laptop memory upgradable once again.

Right-to-repair advocates and DIY enthusiasts are hailing the new technology as a step in the right direction. Popular how-to-repair website and spare parts seller, iFixit, has unsurprisingly praised LPCAMM2, calling it a "big deal" that will help consumers future-proof their notebooks without overpaying. In a blog post celebrating the new memory standard, the company said it will enable consumers to purchase laptops based on their current needs and then install more RAM in the future if necessary.

According to iFixit, traditional LPDDR modules are often soldered directly to the motherboard to preserve signal integrity between the CPU and memory. This is largely because the low voltages at which these chips operate demand shorter track distances on the circuit board to work without signal degradation. LPCAMM2 addresses this issue by putting LPDDR onto a circuit board module designed to be mounted right next to the CPU with "very short traces to help maximize signal integrity."

As demonstrated by iFixit, LPCAMM2 modules in an upcoming Lenovo laptop can be easily replaced by simply removing a cover, loosening three screws, and pulling them straight up. Once the older module is removed, users can install a new one, replace the cover, and then tighten the screws to hold it securely in place. The process is almost as easy as replacing RAM sticks in a standard desktop tower and should make laptops much more upgradable – and sustainable – in the future.

Micron announced its first LPCAMM2 modules at CES 2024 in January, a month after JEDEC published the CAMM2 standard. Following the announcement, Lenovo appears set to ship the first laptops with the new technology. The company is expected to launch the ThinkPad P1 Gen 7 "AI PC" with up to 64 GB of LPDDR5x LPCAMM2 memory later this month.

According to Lenovo, the new memory technology consumes up to 61 percent less power and has a 64 percent smaller footprint compared to traditional DDR5 SODIMM, giving OEMs yet another reason to embrace it with open arms.

That being said, replaceable memory might make it difficult for companies to upsell customers on higher-end models at inflated prices, so it will be interesting to see how they react to this change.

Permalink to story:

 
Absolutely gassed that CAMM left being a proprietary module design and standardized, and now there's an out in the wild implementation of it. I'm sure it'll take a while for laptop designs implementing it to trickle down from the top end of the market, but having one less thing to consider regarding what I can and cannot upgrade/replace will be welcome.
 
I dunno, going to a configuration that requires screws rather than latches of some kind seems a step backwards.

I mean, a small step backwards but still...
 
"replaceable memory might make it difficult for companies to upsell customers on higher-end models at inflated prices, so it will be interesting to see how they react to this change."

That line almost sounds like a quiet jab at Apple. Most laptop manufacturers will certainly embrace this new technology to some degree at least, but you can rest assured Apple will pretend this tech doesn't even exist.
 
I dunno, going to a configuration that requires screws rather than latches of some kind seems a step backwards.
Not sure what you mean. Latches can bend/break easily and may take up more space than a couple of tiny screws. In my opinion screws are always more secure compared to flimsy latches. Besides, it's not like anyone is going to be swapping RAM modules frequently unless you're a hardware tester/reviewer.
 
Not sure what you mean. Latches can bend/break easily and may take up more space than a couple of tiny screws. In my opinion screws are always more secure compared to flimsy latches. Besides, it's not like anyone is going to be swapping RAM modules frequently unless you're a hardware tester/reviewer.

Except in some Sun sparc 20's I have from back in the 1990's, I've never had a ram latch bend or break. Not all latches are flimsy, for example the latches for laptop ram that's currently in every laptop out there don't fail unless one tries really hard to make them fail.

Small screws have that annoying tendency to run away during installation, and in the confines of a laptop, they can be 'deadly'.

As I said, it's a small step backwards. In my opinion, humble or not.
 
That line almost sounds like a quiet jab at Apple. Most laptop manufacturers will certainly embrace this new technology to some degree at least, but you can rest assured Apple will pretend this tech doesn't even exist.

Worth noting that the last time a Macbook had user-upgradeable ram was in 2012, their memory is soldered to the motherboard.
 
Popular how-to-repair website and spare parts seller, iFixit, has unsurprisingly praised LPCAMM2, calling it a "big deal" that will help consumers future-proof their notebooks without overpaying

Except that's not the case though is it LPCAMM2 is more expensive than the equivalent sized SODIMM kit
1: SODIMMS are much easier to take out and replace
2: LPCAMM2 is not as easy to replace as just taking out 3 screws and swapping the new module in there's 4 parts to worry about pt 1: The LPCAMM2 Module pt 2: The LPCAMM connector pt 3: The mobo connector area pt 4: 3 tiny screws
 
Small screws have that annoying tendency to run away during installation, and in the confines of a laptop, they can be 'deadly'.

The screws are captive as explained in the video:

When you consider SO-DIMM was introduced in 1997, it seems like it was time for a shift to a new standard.

Performance in terms of speed and efficiency on par with soldered modules in an easily replaceable package.

Sounds like a win.
 
Back